Universal Software Radio Peripheral, USRP-LW N210
The USRP N210 is high-performance USRP devices that provide higher dynamic range and higher bandwidth than the bus series. Using a Gigabit Ethernet interface, the devices in the Networked Series can transfer up to 50 MS/s of complex, baseband samples to/from the host. This series uses a dual, 14-bit, 100 MS/s ADC and dual 16-bit, 400 MS/s DAC. This series also provides a MIMO expansion port which can be used to synchronize two devices from this series. This is the recommended solution for MIMO systems.
1. Maximum transmission rate:50MS/s
2. Gigabit Ethernet connection
3. MIMO cable connection—based on only one single transceiver link per USRP-LW N210, so MIMO construction must be built by two or more USRP-LW N210s
4. Onboard FPGA processing
5.FPGA:Xilinx Spartan XC3SD3400A
6. ADCs:14 bits- 100 MS/s
7. DACs: 16 bits - 400 MS/s
8. Ability to lock an external 5 or 10 MHz reference clock
9. Optional internal GPS servo clock – USRP-LW N210 GPSDO
A modular design allows the USRP-LW N210 to operate from DC to 6 GHz, while an expansion port allows multiple USRP-LW N210 series devices to be synchronized and used in a MIMO configuration. An optional GPSDO module can also be used to discipline the USRP-LW N210 reference clock to within 0.01 ppm of the worldwide GPS standard. The USRP-LW N210 can stream up to 50 MS/s to and from host applications. Users can implement custom functions in the FPGA fabric, or in the on-board 32-bit RISC softcore. The USRP-LW N210 provides a larger FPGA than the USRP-LW N200 for applications demanding additional logic, memory and DSP resources. The FPGA also offers the potential to process up to 100 MS/s in both the transmit and receive directions. The FPGA firmware can be reloaded through the Gigabit Ethernet interface.
Included in This Equipment:
1. USRP-LW N210
3. 1 Gigabit Ethernet Cable
Please do not hesitate to contact me if you need any further information.
Whatsapp/skype/Wechat: +8618062514745 Web:https://www.luowave.com/en/